12mm x 31mm body M8 internal threading
New product from Raumer. These a commonly known as spit anchors or self driving anchors, because they do not require a predrilled hole OR drill bit. Good choice for expeditions. Must use a bolt driver for correct placement.

HOLE DEPTH IS CRITICAL FOR THE STRENGTH OF THE ANCHOR. READ DIRECTIONS CAREFULLY.

Material: CrNi Cemented and Galvanized steel
Weight: 21 gr (body + cone)
Extraction: 31 KN
Shear: 25 KN

Warning: the strength ​​can change significantly depending on the type of rock and the incorrect installation. Do not use parts from other manufactures, they are not interchangeable.

Made in Italy by Raumer.

Installation Guide

Product Info