SUPERSTAR 10x80mm with nonlocking OR locking biner

This excellent stainless steel resin anchor is used to create abseiling or top-rope anchors. The carabiner allows the rope to be easily threaded into the anchor and facilitates rope retrieval from below. The carabiner is clipped into a 10mm-diameter ring which allows it to hang perpendicular to the face, thus allowing the rope to function well whatever the directional force. The first ring can also be used as an anchor when the stance is being used by more than one person. This carabiner is very resistant to wear as the stainless steel ring is 12mm thick. In the event of damage it can be replaced using a large pair of pliers. The carabiner is equipped with a bar which prevents it from twisting.

The shank is knurled, with a cross-hatch covering 50mm. This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous. The shape of the eyelet has been designed to withstand high levels of tensile or shear force.

For obvious safety reasons, always use two anchors.

Like all Raumer climbing anchor systems, the surface is matt grey to minimize environmental and visual impact.

With nonlocking biner
Material: Stainless Steel AISI 316L
Weight: 420 gr
Dimensions of the shank: 10x80 mm
Static Shear Strength: 30 KN
Extraction Static Strength: 30 KN

With locking biner
Material: Stainless Steel AISI 316L
Weight: 430 gr
Dimensions of the shank: 10x80 mm
Static Shear Strength: 30 KN
Extraction Static Strength: 30 KN

Certifications

Compliance certificate EN 959:2018 – Rock Anchors

Compliance certificate UNI 11578:2015 – type A Anchor

UIAA 123 - 2

Made in Italy

Installation Guide

Information Guide