Superstar with rings 10mm Glue in anchor in 316 stainless - RAUMER
Superstar with rings 10mm Glue in anchor in 316 stainless - RAUMER
SUPERSTAR 10x80mm with two Stainless Steel Ø10mm Rings
This excellent stainless steel resin anchor is used to create abseiling or top-rope anchors. The dual rings allow for easy retrieval of the rope from below. They also allow the rope to function well from any position. The first ring can also be used as a belay anchor when being used by more than one person. For obvious safety reasons the use of two anchors is recommended. The rope must be threaded through both of the lower rings.
PLEASE NOTE: the live rope should never pass through the first ring of the “Superstar” bolt if the lower rings are weight-loaded, as there is a danger this could break.
The shank is knurled, with a cross-hatch covering 50mm. This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous.
The shape of the eyelet has been designed to withstand high levels of tensile or shear force. The two 10m-diameter rings (internal diameter - 32mm) allow the rope to function well with any directional force. Tensile strength is guaranteed to 30 kN but in some tests has exceeded 50 kN.
Like all Raumer climbing anchor systems, the surface is matt grey to minimize environmental and visual impact.
10x80mm
Material: Stainless Steel AISI 316L
Weight: 295 gr
Dimensions of the shank: 10x80 mm
Static Shear Strength: 30 KN
Extraction Static Strength: 30 KN
Certifications
Compliance certificate EN 959:2018 – Rock Anchors
Compliance certificate UNI 11578:2015 – type A Anchor
UIAA 123 - 2
Made in Italy
