Twist hanger in 316 stainless - RAUMER
Twist hanger in 316 stainless - RAUMER
8mm, 10mm & 12mm sizes.
Classic twist (a.k.a. plate) hanger for multi-direction loads, see spec sheet for details. Large opening allows for 2 carabiners. 8mm available with or without M8x16mm A4-70 bolt and o-ring.
8mm FOR CAVING USE ONLY, NOT FOR DYNAMIC LOADING.
Polished surface retains less mud
Weight: 39 gr
Static Shear Strength: 22 KN
Extraction Static Strength: 18 KN
10mm
Matte surface
Weight: 44 gr
Thick: 3.5 mm
Dimensions: 35 x 60 mm
Static Shear Strength: 27 KN
Extraction Static Strength: 26 KN
Complies with EN 795:2012 – Type A Anchors
Complies with EN 959:2007 – Rock anchors
UIAA 123
12mm
Matte surface
Weight: 44 gr
Thick: 3.5 mm
Dimensions: 35 x 60 mm
Static Shear Strength: 27 KN
Extraction Static Strength: 26 KN
Complies with EN 795:2012 – Type A Anchors
Complies with EN 959:2007 – Rock anchors
UIAA 123
Made in Italy by Raumer.
We can not accept returns unless we sent the wrong item or if you received the item and was damaged in transit. Caving, rock climbing and mountaineering are very dangerous sports. It is your responsibility to learn how to, and correctly use the gear.
Meets the requirements of the EN 959, when used with Raumer expansion bolts.